Search
Close this search box.
Contact
Contact

Kiwivac Can Service and Repair All Brands Of Central Vacuum Systems

Book A Service

Accessories - Spare Parts

Need a replacement part for your central vacuum system or an accessory, Kiwivac carries a wide range of Central Vacuum parts. Including replacement inlets, motors, circuit boards, hose handles and parts and filters – cloth, foam and cartridge. Call for details if you have any questions.

Needing some vacuum pipe or fittings / joiners / elbows, Contact us

Can’t find what you are after? Contact us and we can help.

Please Note: You can not order online, phone 0800 354 948.

We are happy to talk to you to make sure you buy the right replacement piece your central vacuum.

To place an order please phone 0800 354 948 for your local supplier or contact your local dealer by phone or email through our find a dealer page

  • Outside Exhaust Vent Cover

    Part No. F31 - To be used on an exterior wall to keep vermin and the weather out when exhausting...

    Rated 0 out of 5

  • Utility Inlet

    Part No. F30 - The utility inlet is attached to the pipe work by the central vacuum power unit...

    Rated 0 out of 5

  • Hose Cuff

    Part No. A10 - The hose cuff screws onto the end of a standard hose, which turns on as soon as you plug your hose into the wall inlet...

    Rated 0 out of 5

  • Curved Wand Hose Handle

    Part No. A11 - The curved wand hose handle (bent end hose handle) screws on to the end of a standard hose...

    Rated 0 out of 5

  • Switch Hose Handle

    Part No. R56 - Did you know you can replace your broken switch hose handle that has an on-off switch. If yours is broken you...

    Rated 0 out of 5

  • Switch Hose Wires

    Part No. R58 - Replacement switch hose wires, if for some reason you switch hose become sluggish and stopped working it can be replaced...

    Rated 0 out of 5

  • Switch Hose Handle (Blue and Grey)

    Part No. R56KH - Replacement Switch hose handle only (metal stub sold separately). If you have broken your blue and grey switch hose handle...

    Rated 0 out of 5

  • Metal Stub for Blue and Grey Switch Hose Handle

    Part No. R56KMS - Replacement Switch hose metal stub only, these are sold separately or as a package with the Blue and Grey...

    Rated 0 out of 5

  • Bleeder Valve

    Part No. R59 – covers the hole on your curved wand. This allows you to control the amount of airflow and...

    Rated 0 out of 5

  • Hose Slip Coupling

    Part No. A12 - The Hose Joiner can be used to add a temporary extra hose onto your existing hose to reach an area that your existing hose...

    Rated 0 out of 5

  • Hose Joiner

    Part No. A13 - A hose joiner is perfect to repair your existing hose if the hose has split. Or to extend your hose permanently...

    Rated 0 out of 5

  • Muffler

    A muffler on the central vacuum unit decreases the noise from your central vacuum helping to produce a quieter environment...

    Rated 0 out of 5

  • Replacement Central Vacuum Motors

    Motor blown – we have a large range of replacement motors for all brands of Central Vacuum power units…

    Rated 0 out of 5

  • VacPan Lever

    Part No. R70 - If your Vacpan lever has broken you don’t have to replace the whole vacpan unit...

    Rated 0 out of 5

  • Air Fresheners

    Part No. A57 - Air Fresheners are ideal for bin or bucket model central vacuums with filters that seem to retain...

    Rated 0 out of 5

  • Central Vacuums Electron EVS Filter

    Part No. R83 - This Foam filter fits Electron, EVS Central Vacuums and some Hayden Supervac systems. It is breathable and...

    Rated 0 out of 5
  • Out of stock

    Hayden Cartridge Washable Filter

    Part No. R80 – The Hayden Cartridge Washable Filter is 138mm high x 178mm diameter...

    Rated 0 out of 5

  • Hayden, Hills Retainer Plate – Locking Cap

    Part No.R80RP - Replacement retainer plates that fit Hayden and Hills central vacuum systems. There are several different types available...

    Rated 0 out of 5

  • Hills Retainer Plate / Filter Locking Cap

    Part No.R80RPO - Replacement retainer plates that fit Hills central vacuum systems. There are several different types available...

    Rated 0 out of 5

  • O’ Ring – AVT replacement rubber Oring

     Part No. R68 - O’ Ring – AVT Slide Plate replacement rubber ring. Orings and gaskets for other central vacuums also available

    Rated 0 out of 5

  • Vacuum Head Adapter (32mm – 35mm)

    Part No.A32 - Vacuum Head Adaptor (32mm – 35mm)

    Rated 0 out of 5

  • Centra Mop Pad Replacement

    Part No. A41CMR - Replacement pads for your Centra mop sold separately (individually). This is to be used damp only...

    Rated 0 out of 5

  • TUBO Central Vacuum Filter

    Part No. R80FT - TUBO central vacuum filter are a washable Polyester Pleated Cartridge filter that fits TUBO Central Vacuum models TS1, TS85...

    Rated 0 out of 5

  • Drimaster Ventilation Filters

    Part No. DRIMF - Replacement Drimaster filters last for 5 years before they need to be replaced. With the filters such a large surface area ....

    Rated 0 out of 5
❛❛
I can’t tell you how much better Kiwivac is than our last central vac! “We changed our central vacuum system to Kiwivac after moving into a new build 2 years ago, where a different system had been supplied by the builder. There was no comparison on how much better Kiwivac was to the other system which was not performing. The service for Kiwivac was also exceptional. We already knew Kiwivac was reliable after living in a 12 year old home with a Kiwivac system that always worked well previously.”
Sarah H, Kohimarama, Auckland
I was blown away by the awesome personal service. They really know their stuff and were so, so helpful. Don't use anyone else.
Dave S, Waikari, Canterbury
I have recently built a new home and had a bucket type central vacuum system installed by the builder. I don’t like it and don’t want it. I have removed it and have replaced it with a Kiwivac bagged system."
Helen A, Mt Albert, Auckland
We have had our Kiwivac Central Vac for 20yrs and the motor died. So I phoned William on the Monday for a quote on a new one. Paid them that night and it was posted the next day. We have always used William and Michelle for products, and the service is AA+++. Will continue to use them in the future."
Nick S, West Harbour, Auckland
I have one of your units. It’s Amazing I have had others but this is so far advanced in everything specially the sucking power. I am selling my property to downsize, hopefully I will be able to have another Kiwivac installed where ever I may end up."
Margaretha G, Albany, Auckland
Very happy with Campbell's service. Very professional and quickly provided feedback and kept us informed during the replacement process
Paul McK, Beachlands, Auckland
Thank you for recommending Craig. He exceeded all our expectations. Our MaxVak central vac is now so much more powerful than before. So nice to know that old fashioned commitment to service still exists.
Paul McK, Beachlands, Auckland
These are your go-to guys any help for your internal vac system, for any brand. They were great and helped us out, and it was no problem at all. For any job big or small, give these guys a call.
Jason W, Henderson, Auckland
Read More
Make Vacuuming a Breeze With a Quality NZ Made Central Vacuum System
Request A Free Quote

Get In Touch

Phone: 0800 354 948
Email: enquiries@kiwivac.co.nz

Head Office

92B Bycroft Rd, Drury, Auckland
PO Box 483, Drury, South Auckland 2247

© Kiwivac | Terms of Service | Privacy Policy

Licence Number
8002227
Website by Digital Stream